Table of Contents

This page describes the current status of the release process.

Since 6.30.0, the automated release process is using Github Actions.

Since 7.0.0-rc4, the release happens in two phases: First pmd-core with all the languages are released. This allows to release then pmd-designer or any other project, that just depends on pmd-core and the languages. And in the second phase, pmd-cli and pmd-dist are released. These include e.g. pmd-designer.

While the release is mostly automated, there are still a few steps, that need manual examination.

Overview

This page gives an overview which tasks are automated to do a full release of PMD. This knowledge is required in order to verify that the release was successful or in case the automated process fails for some reason. Then individual steps need to be executed manually. Because the build is reproducible, these steps can be repeated if the same tag is used.

There is one special case in this project: As outlined above, the release of PMD consists of two phases or parts:

  1. All modules except pmd-cli and pmd-dist are released. That means, pmd-core and all the language modules are released. This is, so that these libs can be used by pmd-designer to create a new release.
  2. pmd-cli and pmd-dist are released after that. Both depend on pmd-designer, and this two-step release process is used for now to break the cycling release dependency.

The three main steps are:

  • Preparations (which sets the versions and creates the tags) - use do-release.sh for that
  • The actual release (which is automated) - GitHub Actions will build the tags when they have been pushed.
  • Prepare the next release (make sure the current main branch is ready for further development)

Preparations

This is the first step. It is always manual and is executed locally. It creates in the end the tag from which the release is created.

Make sure code is up-to-date and everything is committed and pushed with git:

$ ./mvnw clean
$ git pull
$ git status

As a help for the preparation task, the script do-release.sh guides you through the preparation tasks and the whole release process. The script requires a specific source code folder and additional checkouts locally, e.g. it requires that the repo pmd.github.io is checked out aside the main pmd repo:

The script do-release.sh is called in the directory /home/joe/source/pmd and searches for ../pmd.github.io.

Also make sure, that the repo “pmd.github.io” is locally up-to-date and has no local changes.

The Release Notes and docs

Before the release, you need to verify the release notes: Does it contain all the relevant changes for the release? Is it formatted properly? Are there any typos? Does it render properly?

As the release notes are part of the source code, it is not that simple to change it afterward. While the source code for a tag cannot be changed anymore, the published release notes on the GitHub Releases pages or the news posts can be changed afterward (although that’s an entirely manual process).

You can find the release notes here: docs/pages/release_notes.md.

The date (date +%d-%B-%Y) and the version (remove the SNAPSHOT) must be updated in docs/_config.yml, e.g. in order to release version “6.34.0”, the configuration should look like this:

pmd:
    version: 7.2.0
    previous_version: 7.1.0
    date: 2024-05-31
    release_type: minor

The release type could be one of “bugfix” (e.g. 7.1.x), “minor” (7.x.0), or “major” (x.0.0).

The release notes usually mention any new rules that have been added since the last release.

Add the new rules as comments to the quickstart rulesets:

  • pmd-apex/src/main/resources/rulesets/apex/quickstart.xml
  • pmd-java/src/main/resources/rulesets/java/quickstart.xml

The designer lives at pmd/pmd-designer. Update property pmd-designer.version in pom.xml to reference the new version, that will be released shortly. Note: This new version does at the moment not exist. That means, that a full build of the sources will currently fail. That’s why the first phase of the release will build only pmd-core and languages but not pmd-cli and pmd-dist.

In case, there is no need for a new pmd-designer version, we could stick to the latest already available version. Then we can skip the release of pmd-designer and immediately start the second phase of the release.

Starting with PMD 6.23.0 we’ll provide small statistics for every release. This needs to be added to the release notes as the last section. To count the closed issues and pull requests, the milestone on GitHub with the title of the new release is searched. It is important, that the due date of the milestone is correctly set, as the returned milestones in the API call are sorted by due date. Make sure, there is such a milestone on https://github.com/pmd/pmd/milestones. The following snippet will create the numbers, that can be attached to the release notes as a last section:

LAST_VERSION=7.1.0
NEW_VERSION=7.2.0
NEW_VERSION_COMMITISH=HEAD

echo "### Stats"
echo "* $(git log pmd_releases/${LAST_VERSION}..${NEW_VERSION_COMMITISH} --oneline --no-merges |wc -l) commits"
echo "* $(curl -s "https://api.github.com/repos/pmd/pmd/milestones?state=all&direction=desc&per_page=5"|jq ".[] | select(.title == \"$NEW_VERSION\") | .closed_issues") closed tickets & PRs"
echo "* Days since last release: $(( ( $(date +%s) - $(git log --max-count=1 --format="%at" pmd_releases/${LAST_VERSION}) ) / 86400))"

Note: this part is also integrated into do-release.sh.

Check in all (version) changes to branch master or any other branch, from which the release takes place:

$ git commit -a -m "Prepare pmd release <version>"
$ git push

The Homepage

The GitHub repo pmd.github.io hosts the homepage for https://pmd.github.io. All the following tasks are to be done in this repo.

The new version needs to be entered into _config.yml, e.g.:

pmd:
  latestVersion: 7.2.0
  latestVersionDate: 31-May-2024

Also move the previous version down into the “downloads” section. We usually keep only the last 3 versions in this list, so remove the oldest version.

Then create a new page for the new release, e.g. _posts/2024-05-31-PMD-7.2.0.md and copy the release notes into this page. This will appear under the news section.

Note: The release notes typically contain some Jekyll macros for linking to the rule pages. These macros won’t work in a plain markdown version. Therefore, you need to render the release notes first:

# install bundles needed for rendering release notes
bundle config set --local path vendor/bundle
bundle config set --local with release_notes_preprocessing
bundle install

RELEASE_NOTES_POST="_posts/$(date -u +%Y-%m-%d)-PMD-${RELEASE_VERSION}.md"
echo "Generating ../pmd.github.io/${RELEASE_NOTES_POST}..."
NEW_RELEASE_NOTES=$(bundle exec docs/render_release_notes.rb docs/pages/release_notes.md | tail -n +6)
cat > "../pmd.github.io/${RELEASE_NOTES_POST}" <<EOF

Check in all (version, blog post) changes to branch master:

$ git commit -a -m "Prepare pmd release <version>"
$ git push

The actual release

The actual release is done by changing the versions, creating a tag and pushing this tag. Previously this was done by calling maven-release-plugin, but these steps are done without the plugin to have more control. And since we might reference a not yet released pmd-designer version, the test-build would fail.

We first change the version of PMD and all modules by basically removing the “-SNAPSHOT” suffix, building the changed project locally with tests (and with skipping pmd-cli and pmd-dist) in order to be sure, everything is in working order. Then the version changes are committed and a new release tag is created. Then, the versions are changed to the next snapshot. As last step, everything is pushed.

RELEASE_VERSION is the version of the release. It is reused for the tag. DEVELOPMENT_VERSION is the next snapshot version after the release. Skipping the builds of pmd-cli and pmd-dist is done by setting the property skip-cli-dist.

RELEASE_VERSION=7.2.0
DEVELOPMENT_VERSION=7.3.0-SNAPSHOT
# Change version in the POMs to ${RELEASE_VERSION} and update build timestamp
./mvnw --quiet versions:set -DnewVersion="${RELEASE_VERSION}" -DgenerateBackupPoms=false -DupdateBuildOutputTimestampPolicy=always
# Transform the SCM information in the POM
sed -i "s|<tag>.\+</tag>|<tag>pmd_releases/${RELEASE_VERSION}</tag>|" pom.xml
# Run the project tests against the changed POMs to confirm everything is in running order (skipping cli and dist)
./mvnw clean verify -Dskip-cli-dist -Pgenerate-rule-docs
# Commit and create tag
git commit -a -m "[release] prepare release pmd_releases/${RELEASE_VERSION}"
git tag -m "[release] copy for tag pmd_releases/${RELEASE_VERSION}" "pmd_releases/${RELEASE_VERSION}"
# Update POMs to set the new development version ${DEVELOPMENT_VERSION}
./mvnw --quiet versions:set -DnewVersion="${DEVELOPMENT_VERSION}" -DgenerateBackupPoms=false -DupdateBuildOutputTimestampPolicy=never
sed -i "s|<tag>.\+</tag>|<tag>HEAD</tag>|" pom.xml
git commit -a -m "[release] prepare for next development iteration"
# Push branch and tag pmd_releases/${RELEASE_VERSION}
git push origin "${CURRENT_BRANCH}"
git push origin tag "pmd_releases/${RELEASE_VERSION}"

Once we have pushed the tag, GitHub Actions take over and build a new version from this tag. Since it is a tag build and a release version (version without SNAPSHOT), the build script will do a couple of additional stuff. This is all automated in .ci/build.sh.

Note: The property “skip-cli-dist” is activated, so this release command doesn’t include pmd-cli and pmd-dist. They will be released separately after pmd-designer is released. Since pmd-dist is not included in this first step, no binaries are created yet.

Here is, what happens:

The release on GitHub Actions currently takes about 30-45 minutes. Once this is done, you can proceed with releasing pmd designer, see https://github.com/pmd/pmd-designer/blob/master/releasing.md. Make sure to release the version, you have used earlier for the property pmd-designer.version.

Once the pmd-designer release is done, you can proceed with part 2. This is simply triggering manually a build on GitHub Actions: https://github.com/pmd/pmd/actions/workflows/build.yml from the same tag again, but with the parameter “build_cli_dist_only” set to “true”. With this parameter, the script .ci/build.sh will perform the following steps:

Once this second GitHub Action run is done, you can spread additional news:

  • Write an email to the mailing list

    To: PMD Developers List pmd-devel@lists.sourceforge.net Subject: [ANNOUNCE] PMD released

    • Downloads: https://github.com/pmd/pmd/releases/tag/pmd_releases%2F
    • Documentation: https://docs.pmd-code.org/pmd-doc-/

    And Copy-Paste the release notes

  • Tweet about the new release

Tweet on https://twitter.com/pmd_analyzer, eg.:

PMD 6.34.0 released: https://github.com/pmd/pmd/releases/tag/pmd_releases/6.34.0 #PMD

Checklist

Task Description URL ☐ / ✔
maven central The new version of all artifacts are available in maven central https://repo.maven.apache.org/maven2/net/sourceforge/pmd/pmd/
github releases A new release with 3 assets (bin, src, doc) is created https://github.com/pmd/pmd/releases
sourceforge files The 3 assets (bin, src, doc) are uploaded, the new version is pre-selected as latest https://sourceforge.net/projects/pmd/files/pmd/
homepage Main landing page points to new version, doc for new version is available https://pmd.github.io
homepage2 New blogpost for the new release is posted https://pmd.github.io/#news
docs New docs are uploaded https://docs.pmd-code.org/latest/
docs2 New version in the docs is listed under “Version specific documentation” https://docs.pmd-code.org/
docs-archive New docs are also on archive site https://pmd.sourceforge.io/archive.phtml
javadoc New javadocs are uploaded https://docs.pmd-code.org/apidocs/
news New blogpost on sourceforge is posted https://sourceforge.net/p/pmd/news/
regression-tester New release baseline is uploaded https://pmd-code.org/pmd-regression-tester
mailing list announcement on mailing list is sent https://sourceforge.net/p/pmd/mailman/pmd-devel/
twitter tweet about the new release https://twitter.com/pmd_analyzer
gitter message about the new release https://matrix.to/#/#pmd_pmd:gitter.im

Prepare the next release

There are a couple of manual steps needed to prepare the current main branch for further development.

  • Move any open issues to the next milestone, close the current milestone on https://github.com/pmd/pmd/milestones and create a new one for the next version (if one doesn’t exist already).
  • Update version in docs/_config.yml. Note - the next version needs to have a SNAPSHOT in it otherwise the javadoc links won’t work during development.

    pmd:
        version: 7.3.0-SNAPSHOT
        previous_version: 7.2.0
        date: 2024-??-??
        release_type: minor
    
  • Prepare a new empty release notes. Note, this is done by do-release.sh already.
    • Move version/release info from docs/pages/release_notes.md to docs/pages/release_notes_old.md.
    • Update version/release info in docs/pages/release_notes.md. Use the following template:
---
title: PMD Release Notes
permalink: pmd_release_notes.html
keywords: changelog, release notes
---

## {{ site.pmd.date | date: "%d-%B-%Y" }} - {{ site.pmd.version }}

The PMD team is pleased to announce PMD {{ site.pmd.version }}.

This is a {{ site.pmd.release_type }} release.

{% tocmaker %}

### 🚀 New and noteworthy

### 🐛 Fixed Issues

### 🚨 API Changes

### ✨ External Contributions

{% endtocmaker %}

Finally, commit and push the changes:

$ git commit -m "Prepare next development version"
$ git push origin master

Branches

Merging

If the release was done on a maintenance branch, such as pmd/5.4.x, then this branch should be merged into the next “higher” branches, such as pmd/5.5.x and master.

This ensures, that all fixes done on the maintenance branch, finally end up in the other branches. In theory, the fixes should already be there, but you never now.

Multiple releases

If releases from multiple branches are being done, the order matters. You should start from the “oldest” branch, e.g. pmd/5.4.x, release from there. Then merge (see above) into the next branch, e.g. pmd/5.5.x and release from there. Then merge into the master branch and release from there. This way, the last release done, becomes automatically the latest release on https://docs.pmd-code.org/latest/ and on sourceforge.

(Optional) Create a new maintenance branch

At some point, it might be time for a new maintenance branch. Such a branch is usually created from the tag. Here are the steps:

  • Create a new branch: git branch pmd/7.1.x pmd_releases/7.1.0
  • Update the version in both the new branch, e.g. mvn versions:set -DnewVersion=7.1.1-SNAPSHOT.
  • Update the release notes on both the new branch