AvoidSynchronizedAtMethodLevel
Since: PMD 3.0
Priority: Medium (3)
Method-level synchronization can cause problems when new code is added to the method. Block-level synchronization helps to ensure that only the code that needs synchronization gets it.
This rule is defined by the following XPath expression:
//MethodDeclaration[pmd-java:modifiers() = "synchronized"]
Example(s):
public class Foo {
// Try to avoid this:
synchronized void foo() {
// code, that doesn't need synchronization
// ...
// code, that requires synchronization
if (!sharedData.has("bar")) {
sharedData.add("bar");
}
// more code, that doesn't need synchronization
// ...
}
// Prefer this:
void bar() {
// code, that doesn't need synchronization
// ...
synchronized(this) {
if (!sharedData.has("bar")) {
sharedData.add("bar");
}
}
// more code, that doesn't need synchronization
// ...
}
// Try to avoid this for static methods:
static synchronized void fooStatic() {
}
// Prefer this:
static void barStatic() {
// code, that doesn't need synchronization
// ...
synchronized(Foo.class) {
// code, that requires synchronization
}
// more code, that doesn't need synchronization
// ...
}
}
Use this rule by referencing it:
<rule ref="category/java/multithreading.xml/AvoidSynchronizedAtMethodLevel" />
AvoidThreadGroup
Since: PMD 3.6
Priority: Medium (3)
Avoid using java.lang.ThreadGroup; although it is intended to be used in a threaded environment it contains methods that are not thread-safe.
This rule is defined by the following XPath expression:
//ConstructorCall/ClassOrInterfaceType[pmd-java:typeIs('java.lang.ThreadGroup')]
| //MethodCall[@MethodName = 'getThreadGroup']
Example(s):
public class Bar {
void buz() {
ThreadGroup tg = new ThreadGroup("My threadgroup");
tg = new ThreadGroup(tg, "my thread group");
tg = Thread.currentThread().getThreadGroup();
tg = System.getSecurityManager().getThreadGroup();
}
}
Use this rule by referencing it:
<rule ref="category/java/multithreading.xml/AvoidThreadGroup" />
AvoidUsingVolatile
Since: PMD 4.1
Priority: Medium High (2)
Use of the keyword ‘volatile’ is generally used to fine tune a Java application, and therefore, requires a good expertise of the Java Memory Model. Moreover, its range of action is somewhat misknown. Therefore, the volatile keyword should not be used for maintenance purpose and portability.
This rule is defined by the following XPath expression:
//FieldDeclaration[pmd-java:modifiers() = "volatile"]
Example(s):
public class ThrDeux {
private volatile String var1; // not suggested
private String var2; // preferred
}
Use this rule by referencing it:
<rule ref="category/java/multithreading.xml/AvoidUsingVolatile" />
DoNotUseThreads
Since: PMD 4.1
Priority: Medium (3)
The J2EE specification explicitly forbids the use of threads. Threads are resources, that should be managed and monitored by the J2EE server. If the application creates threads on its own or uses own custom thread pools, then these threads are not managed, which could lead to resource exhaustion. Also, EJBs might be moved between machines in a cluster and only managed resources can be moved along.
This rule is defined by the following XPath expression:
//ClassOrInterfaceType
[pmd-java:typeIs('java.lang.Thread') or pmd-java:typeIs('java.util.concurrent.ExecutorService')]
(: allow Thread.currentThread().getContextClassLoader() :)
[not(parent::TypeExpression[parent::MethodCall[pmd-java:matchesSig('_#currentThread()')
and parent::MethodCall[pmd-java:matchesSig('_#getContextClassLoader()')]
]
]
)]
(: exclude duplicated types on the same line :)
[not((parent::FieldDeclaration|parent::LocalVariableDeclaration)/VariableDeclarator/*[2][pmd-java:typeIs('java.lang.Thread') or pmd-java:typeIs('java.util.concurrent.ExecutorService')])
or
@BeginLine != (parent::FieldDeclaration|parent::LocalVariableDeclaration)/VariableDeclarator/ConstructorCall/ClassOrInterfaceType/@BeginLine]
|
//MethodCall[*[1][not(pmd-java:nodeIs('MethodCall'))][pmd-java:nodeIs('Expression') and (pmd-java:typeIs('java.util.concurrent.Executors')
or pmd-java:typeIs('java.util.concurrent.ExecutorService'))]]
Example(s):
// This is not allowed
public class UsingThread extends Thread {
}
// Neither this,
public class UsingExecutorService {
public void methodX() {
ExecutorService executorService = Executors.newFixedThreadPool(5);
}
}
// Nor this,
public class Example implements ExecutorService {
}
// Nor this,
public class Example extends AbstractExecutorService {
}
// Nor this
public class UsingExecutors {
public void methodX() {
Executors.newSingleThreadExecutor().submit(() -> System.out.println("Hello!"));
}
}
Use this rule by referencing it:
<rule ref="category/java/multithreading.xml/DoNotUseThreads" />
DontCallThreadRun
Since: PMD 4.3
Priority: Medium Low (4)
Explicitly calling Thread.run() method will execute in the caller’s thread of control. Instead, call Thread.start() for the intended behavior.
This rule is defined by the following XPath expression:
//MethodCall[ pmd-java:matchesSig("java.lang.Thread#run()") ]
Example(s):
Thread t = new Thread();
t.run(); // use t.start() instead
new Thread().run(); // same violation
Use this rule by referencing it:
<rule ref="category/java/multithreading.xml/DontCallThreadRun" />
DoubleCheckedLocking
Since: PMD 1.04
Priority: High (1)
Partially created objects can be returned by the Double Checked Locking pattern when used in Java. An optimizing JRE may assign a reference to the baz variable before it calls the constructor of the object the reference points to.
Note: With Java 5, you can make Double checked locking work, if you declare the variable to be volatile
.
For more details refer to: http://www.javaworld.com/javaworld/jw-02-2001/jw-0209-double.html or http://www.cs.umd.edu/~pugh/java/memoryModel/DoubleCheckedLocking.html
This rule is defined by the following Java class: net.sourceforge.pmd.lang.java.rule.multithreading.DoubleCheckedLockingRule
Example(s):
public class Foo {
/*volatile */ Object baz = null; // fix for Java5 and later: volatile
Object bar() {
if (baz == null) { // baz may be non-null yet not fully created
synchronized(this) {
if (baz == null) {
baz = new Object();
}
}
}
return baz;
}
}
Use this rule by referencing it:
<rule ref="category/java/multithreading.xml/DoubleCheckedLocking" />
NonThreadSafeSingleton
Since: PMD 3.4
Priority: Medium (3)
Non-thread safe singletons can result in bad state changes. Eliminate static singletons if possible by instantiating the object directly. Static singletons are usually not needed as only a single instance exists anyway. Other possible fixes are to synchronize the entire method or to use an initialize-on-demand holder class.
Refrain from using the double-checked locking pattern. The Java Memory Model doesn’t
guarantee it to work unless the variable is declared as volatile
, adding an uneeded
performance penalty. Reference
See Effective Java, item 48.
This rule is defined by the following Java class: net.sourceforge.pmd.lang.java.rule.multithreading.NonThreadSafeSingletonRule
Example(s):
private static Foo foo = null;
//multiple simultaneous callers may see partially initialized objects
public static Foo getFoo() {
if (foo==null) {
foo = new Foo();
}
return foo;
}
This rule has the following properties:
Name | Default Value | Description | Multivalued |
---|---|---|---|
checkNonStaticMethods | true | Check for non-static methods. Do not set this to false and checkNonStaticFields to true. | no |
checkNonStaticFields | false | Check for non-static fields. Do not set this to true and checkNonStaticMethods to false. | no |
Use this rule with the default properties by just referencing it:
<rule ref="category/java/multithreading.xml/NonThreadSafeSingleton" />
Use this rule and customize it:
<rule ref="category/java/multithreading.xml/NonThreadSafeSingleton">
<properties>
<property name="checkNonStaticMethods" value="true" />
<property name="checkNonStaticFields" value="false" />
</properties>
</rule>
UnsynchronizedStaticFormatter
Since: PMD 6.11.0
Priority: Medium (3)
Instances of java.text.Format
are generally not synchronized.
Sun recommends using separate format instances for each thread.
If multiple threads must access a static formatter, the formatter must be
synchronized on block level.
This rule is defined by the following Java class: net.sourceforge.pmd.lang.java.rule.multithreading.UnsynchronizedStaticFormatterRule
Example(s):
public class Foo {
private static final SimpleDateFormat sdf = new SimpleDateFormat();
void bar() {
sdf.format(); // poor, no thread-safety
}
void foo() {
synchronized (sdf) { // preferred
sdf.format();
}
}
}
This rule has the following properties:
Name | Default Value | Description | Multivalued |
---|---|---|---|
allowMethodLevelSynchronization | false | If true, method level synchronization is allowed as well as synchronized block. Otherwise only synchronized blocks are allowed. | no |
Use this rule with the default properties by just referencing it:
<rule ref="category/java/multithreading.xml/UnsynchronizedStaticFormatter" />
Use this rule and customize it:
<rule ref="category/java/multithreading.xml/UnsynchronizedStaticFormatter">
<properties>
<property name="allowMethodLevelSynchronization" value="false" />
</properties>
</rule>
UseConcurrentHashMap
Since: PMD 4.2.6
Priority: Medium (3)
Minimum Language Version: Java 1.5
Since Java5 brought a new implementation of the Map designed for multi-threaded access, you can perform efficient map reads without blocking other threads.
This rule is defined by the following XPath expression:
//VariableDeclarator[VariableDeclaratorId[pmd-java:typeIsExactly('java.util.Map')] and *[2][self::ConstructorCall and not(pmd-java:typeIs('java.util.concurrent.ConcurrentHashMap'))]]
Example(s):
public class ConcurrentApp {
public void getMyInstance() {
Map map1 = new HashMap(); // fine for single-threaded access
Map map2 = new ConcurrentHashMap(); // preferred for use with multiple threads
// the following case will be ignored by this rule
Map map3 = someModule.methodThatReturnMap(); // might be OK, if the returned map is already thread-safe
}
}
Use this rule by referencing it:
<rule ref="category/java/multithreading.xml/UseConcurrentHashMap" />
UseNotifyAllInsteadOfNotify
Since: PMD 3.0
Priority: Medium (3)
Thread.notify() awakens a thread monitoring the object. If more than one thread is monitoring, then only one is chosen. The thread chosen is arbitrary; thus its usually safer to call notifyAll() instead.
This rule is defined by the following XPath expression:
//MethodCall[@MethodName="notify" and ArgumentList[count(*) = 0]]
Example(s):
void bar() {
x.notify();
// If many threads are monitoring x, only one (and you won't know which) will be notified.
// use instead:
x.notifyAll();
}
Use this rule by referencing it:
<rule ref="category/java/multithreading.xml/UseNotifyAllInsteadOfNotify" />